The Tanis Weigher is a unit for the preparation of the premix. It works by weighing ingredients (liquid and dry), adding them into the vessel and mixing them. When this is done the premix will be pumped or transported by vacuum to the next stage of the process.
The order in which the ingredients are weighed and the mixing time depend on the recipe.
Wet and dry ingredients dosed by weight
Ingredient infeed valves
Mixer(s)
Tanis Coil Cooker C-31
Dissolving, precooking or cooking of sugar-water-glucose slurry.
High Capacities
Simple Cleaning
Continuous
Tanis Jet Cooker
Cooker for starch jellies
High capacity
Easy cleaning
Tanis Additive Blending System
Adding additives to the cooked mass
Accurate dosing
Different colours
Vitamines insert
Up to 6 different colours and flavours
T-Gel MOULDING starch 800R-HC
Moulding Gums and Jellies masses
Accessibility
Operational Heights
Accurate Depositing (slow speed)
Starch filling
Easier to clean due to ergonomic design (reduction starch contamination)
Lower total costs of operation (TCO) through energy savings and high utilization efficiencies.
T-Gel MOULDING starch 800G
The Moulding machine for the replacement market.
Executed with gantry robot and pallets transport under depositor, the system has the same footprint as current moguls in the market
Lower maximum tray speed prevents product sloshing and or shape collapsing
Guaranteed high efficiency provides the same output with lower tray speeds
T-Gel Starch Conditioning
conditioning the starch
Energy Efficient
Triple sieve system
Balanced flow
Explosion safe
Tanis Candy Cleaner
Cleaning Candy integrated after the Moulding
Cleaning with compressed air
Integrated in dust collection system
Hygienic design without brushes
Easy to dissassemble for inspection and cleaning
Tanis Oiler
The oiling drum is for automatic adding of a polishing agent layer on to a jelly or similar product. Available for small, medium and large capacities.
All Stainless steel
Inclination adjustment to control residence time
Hygienic execution
Reliable double drive system
Variable dosing of polishing agent
Available for small and big capacities
Tanis Sander
A fully automatic system for continuous controlled sugar coating of starch-moulded soft boiled candies. Available for small, medium and large capacities.
Hygienic execution
Reliable double drive system
Available for small and big capacities
Stainless steel finish
Inclination adjustment
Steamer with special exhaust to avoid too much moisture
Heaters to dry the air and sugar
T-Gel Conditioning Room
T-Gel Conditioning Room
Easier maintenance on units
If one air-handler system goes down, then other units can take over
Better regulated airflow control over heating and cooling coils
Smaller ventilator > lower energy level with bigger rooms
Lower cost in spare parts
T-Gel Automated Track System (ATS)
T-Gel automated track system (ATS)
Needs less staff
Less circulation downtime.
Fewer tray damage
Less moulding line stops
Higher stacks possible (up to 70)
T-Gel 800x400 pump
T-Gel Full Tray Pumps are available in a wide variety of piston diameters and piston configurations to suit a wide span of product masses from single colour articles to side by side articles through changeover of nozzle plates and piston bars. The T-Gel Full Tray Pump has a standard configuration of 20x44 rows and piston diameters ranging from 9 to 12mm resulting in a maximum piece count of 880 per tray.
multiple entry ports > impoved mass flow
long pistons > good depsoting accuracy
heated manifolds > better flow of mass
quick release feature of nozzle plate
T-Gel 400x400 PUMP
The T-Gel 400*400 pump is a pump designed for smaller depositing operations but with all the characteristics of the T-Gel Full Tray pump.
multiple entry ports > impoved mass flow
long pistons > good depsoting accuracy
heated manifolds > better flow of mass
quick release feature of nozzle plate
CENTER IN SHELL PUMP
The full tray Centre in Shell pump allows the operator to independently control the centre portion and shell portion of the product during the deposit cycle. The full tray Centre in Shell pump is available in a wide variety of piston diameters and piston configurations to create a pump either dedicated for Centre in Shell depositing or usable for a wide range of products including single colour or side by side articles.