T-GEL MOULDING models

T-GEL MOULDING models

On the Interpack we have shown the T-Gel Moulding Starch 800R-HC model; a jelly depositor for starch with 800mm trays for high capacity. This machine was developed in 2015 and based on experiences in the market and customer needs, the first improvements have already been incorporated and Tanis has broadened the capacity range. The following models are now in Tanis portfolio:

T-Gel moulding Starch 800G
This is a depositor with a lower capacity and instead of the 4 axis robots this model is equipped with a gantry robot and designed for plants with limited ceiling height and floor space. This can be the case when replacing an existing Mogul and the space available is limited to the footprint of that Mogul. Capacity of the line is 25 trays/min with an efficiency of 92%.

 

T-Gel moulding starch 800R
When floor space is not an issue and the ceiling height is sufficient, the 800R model is a good option; This depositor is equipped with 4 axis robots to handle the in and outfeed of the trays. Capacity of the line is 25 trays/min with an efficiency of 92%.
The 800R and 800G can be extended with a second pump position for double layer products.

T-Gel moulding starch 800R-HC
This depositor is equipped with 4 axis robots, double pump and double tray movement for high capacity requirements. Capacity of this line is up to 40 trays/min with an efficiency of 92%.

T-Gel moulding starch 1200R-HC
This depositor is equipped with 4 axis robots, double pump and double tray movement for high capacity requirements. The trays for this depositor are 1200mm instead of 800mm. Capacity of this line is up to 40 trays/min with an efficiency of 92%.

For the smaller capacities (100-750kg/hr), Tanis has the 400M and 400-HC models available. The 400M is a manually operated machine with a capacity of appr. 10 trays /min and the 400HC is equipped with manually operated jib cranes for tray handling and has a capacity of appr. 20 trays/min.

contact

Contact us X